Skip to main content

Types of Beams

 

  1. Simply supported beam: Imagine a gymnast on a balance beam. The beam is supported on both ends, just like the gymnast's feet are supported on the ground. This is a simply supported beam.

  2. Cantilever beam: Now, imagine the same gymnast, but this time she's hanging from a bar by one hand. Her body is like a cantilever beam, with the bar as the fixed support and her hand as the free end.

  3. Continuous beam: Have you ever seen a bridge with multiple supports? The bridge deck is like a continuous beam, with supports at multiple points along its length.

  4. Fixed beam: Picture a diving board anchored to the side of a pool. The board is fixed at one end and can't rotate or move. This is a fixed beam.

  5. Composite beam: Imagine a wooden board with a steel plate bolted to the bottom. The combination of the two materials creates a composite beam, with unique properties based on the characteristics of each material.

  6. Tapered beam: Think of a traffic cone, which is wider at the base and narrows to a point at the top. This shape is like a tapered beam, with varying cross-sectional area along its length.

  7. Truss beam: Look at a crane or a construction site, where steel beams are arranged in triangular patterns. This is a truss beam, which is made up of interconnected triangular sections to provide stability and support.

  8. Reinforced concrete beam: Visualize a concrete beam with steel rods embedded within it. The steel provides added strength and reinforcement to the concrete, creating a durable and sturdy reinforced concrete beam.

I hope this helps you visualize and understand the different types of beams in a fun and interesting way!

Comments

Post a Comment

Popular posts from this blog

Common Terms for PVC Pipe, Fittings, and Parts

  Common Terms for PVC Pipe, Fittings, and Parts ABS  or Acrylonitrile Butadiene Styrene is a group of plastics made from polymers with prescribed percentages of acrylonitrile. Adapter  is a fitting that joins two different pipes together. It can also join threaded with nonthreaded pipe. Aging  is the act of exposing materials to an environment for a period, or the effect on materials that have been exposed to an environment for an extended. ASTM  stands for American Society for Testing and Materials. Known today as ASTM International, this is a leader in international standards use for safety, quality and consumer confidence. There are a number of ASTM standards that apply to PVC and CPVC pipe and fittings. Beam Loading  is the process of applying specified force to a piece of pipe that’s supported at two points. This is usually expressed in pounds per distance between the centers of the supports. Belled End  pipe is made to flare out at one end, whic...
Post a Comment
Read more

GATE 2018: Candidate Responses Released On GOAPS Portal; Check Now on offical website

NEW DELHI:   IIT Guwahati has released candidate responses for students who appeared in GATE 2018 exam.  GATE 2018 exam  was conducted on February 3,4, 10 and 11.  The responses are available on GOPS portal for download. Currently, only candidate's responses have been made available. The question paper and official answer key will be available soon. Once the official answer key is released candidates will be able to challenge the answer key and/or their responses. This year the GATE exam was conducted for 23 different papers. According to the schedule released by IIT Guwahati on the official page of GATE 2018, challenges/contests by candidates on GATE answer key will be accepted from February 21 to February 23 2018. GATE 2018 results will be announced online on the application Portal on March 17, 2018 http://appsgate.iitg.ac.in/doLogin.html GATE 2018 answer key: How to check- Step 1: Visit the official website of GATE 2018 at gate.iitg.ac.in Step 2: Now ...
Post a Comment
Read more

Mix Proportioning using IS code

 Mix proportioning is the process of determining the quantities of materials needed to produce concrete with the desired properties. The Indian Standard Code for mix proportioning is IS 10262:2009. Here are the steps to follow for mix proportioning using IS code: Determine the target mean strength of concrete (fck): This is the strength that is required for the concrete to perform its intended function. It is usually specified in the project specifications or can be determined based on the intended use and the requirements of the structure. Determine the water-cement ratio (w/c): The w/c ratio is the ratio of the weight of water to the weight of cement used in the concrete mix. The maximum w/c ratio specified in IS code is 0.50. Determine the cement content: The cement content is determined based on the target mean strength and the w/c ratio. The formula to calculate the cement content is: Cement content = (fck + 1.65 x standard deviation) x (1/w/c) x 1000 Where fck is the target m...
Post a Comment
Read more